[Moon-Net] Yeasu FT487 and the microham usb III interface with a sequencer (Paul Chandler)

Paul Chandler pcdeveloper at me.com
Wed Sep 25 21:35:51 CEST 2019

Guys, I came across this .

Please refer to the DB15-FT-847 schematic on the web site:

You would need to lift the resistor from pin 11 of the DB15.
Connect Pin 11 to the PTT input of your sequencer and connect
the PTT output of your sequencer (close to ground to transmit)
to the resistor.

Also the stuff mod I saw by PA4EME , where we add a little circuit to inhibit the tax via the tuner port.
So around the lines of my thinking .
I will test these out shortly.

Paul Chandler

Sent from my iPad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.pe1itr.com/pipermail/moon-net/attachments/20190925/845fecdb/attachment.html>

More information about the Moon-net mailing list