[Moon-Net] Feed TX-RX connections 23cm

Edward R Cole kl7uw at acsalaska.net
Fri Nov 18 05:30:53 CET 2016

Here is a photo of  a VE4MA CP feed (note the screws) and connector 
markings.  Also note that it was fabricated by WD5AGO ("AGO" stands 
out highlighted in red).   This a feed for 3400-MHz; only physical 
size is different.

73, Ed - KL7UW

At 05:42 PM 11/17/2016, Barry Malowanchuk wrote:
>If this is the screw polarizer version? then with the ports at 10 
>oclock and 2 pm, the 10 am position is RX and 2 pm is TX
>Barry VE4MA
>----- Original Message -----
>From: "Bill Booth" <ve3nxk at gmail.com>
>To: moon-net at mailman.pe1itr.com
>Sent: Thursday, November 17, 2016 8:07:36 PM
>Subject: [Moon-Net] Feed TX-RX connections 23cm
>Trying to see if I can improve my signal on 23cm a bit with the 
>summer sticking
>around for another day.
>Wondering what are the correct ports for RX and TX on a VE4MA feed 
>(standard round
>feed with ring). I looked online at some pics and they seem to be 
>all different.
>Looking from back of feed, some have connections on top, others on 
>bottom .... RX
>on right or left same with TX.
>Is there a right way??
>Bill Booth VE3NXK
>Sundridge ON, Canada
>79.23.37 W x 45.46.18 N
>Visit my weather WebCam at http://www.almaguin.com/wxcurrent/weather.html
>Organ and Tissue Donation - The Gift of Life
>Talk to your family.  Your decision can make a difference.
>Moon-Net posting and subscription instructions are at 
>Moon-Net posting and subscription instructions are at 

73, Ed - KL7UW
     "Kits made by KL7UW"
Dubus Mag Business e-mail:
     dubususa at gmail.com 

More information about the Moon-net mailing list