[Moon-Net] TS-2000X Question

Joe Taylor joe at princeton.edu
Mon Nov 7 14:09:43 CET 2016


Hi Paul,

Turn off the TX-2000 speech processor.

	-- Joe, K1JT

On 11/6/2016 11:49 PM, Paul Andrews wrote:
> EME'ers,
>
> I know that the TS-2000X is a popular radio in the EME community, so
> this is a great place to ask a question.
>
> I interfaced my SignaLink audio interface to the ACC2 port for audio
> in / audio out / PTT.   WJST interfaces to the SignaLink and the
> SignaLink keys the radio via PTT and audio tones are transmitted.
> Receive audio from the SignaLink is sent to WSJT and JT65 traces are
> decoded easily.
>
> Now the issue:  When the TS-2000X is keyed to transmit, the transmit
> power ramps up smoothly for 2 to 3 seconds before full output is
> reached.  If I enable the TX audio monitor feature - the JT65 audio
> tones are also ramped up at the same rate.
>
> This issue is only observed on SSB.  FM TX Power is immediate.  CW TX
> Power is immediate.
>
> Any ideas?  Please tell me that this is normal for the TS-2000 or TX
> Power Ramp is a feature in a secret menu.  Has anyone seen this issue
> with there TS-2000?
>
> 73 - Paul - W2HRO
> _______________________________________________
> Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
>


More information about the Moon-net mailing list