[Moon-Net] MAP65 SDR-Radio

Don Hawbaker donhawbaker at outlook.com
Sun Nov 6 15:12:15 CET 2016

Thanks for the suggestion.  I found a copy of 1.5, but still no go.  MAP65 is not receiving data. Will keep researching for a while.  Recheck everything, must be something I am missing.

Sent from my iPhone

> On Nov 5, 2016, at 12:42 PM, Dimitry Borzenko <4z5cp at bezeqint.net> wrote:
> Hello.
> You should use older version 1.5 , newer version do not has MAP65 support.
> Regards. 
> -----Original Message-----
> From: moon-net-bounces at mailman.pe1itr.com
> [mailto:moon-net-bounces at mailman.pe1itr.com] On Behalf Of Don Hawbaker
> Sent: Saturday, November 05, 2016 6:00 PM
> To: moon-net at mailman.pe1itr.com
> Subject: [Moon-Net] MAP65 SDR-Radio
> The documentation for MAP65 V2.5 says that it will work with SDR-Radio.
> SDR-Radio is considerably less complicated than LINRAD.  But I have not been
> able to make it work.  I'm using an SDR-IQ which works with SDR-Radio V2.3.
> I gave set up SDR-Radio to send UDP to 50004.  I have set up MAP65 to
> receive same.
> But instead of a connection, the receiving indicator just flickers every few
> seconds.  The receive frequency changes and then jumps around.  There is no
> steady connection like I get with LINRAD (is there a setup manual for 4.10 -
> incredibly complicated software, not user friendly?)   There are yellow
> lines on the waterfall screen.  Sure would like to make this configuration
> operational.
> Anybody using this configuration?  Have I missed something?  
> 73. WA3RGQ
> _______________________________________________
> Moon-Net posting and subscription instructions are at
> http://www.nlsa.com/nets/moon-net-help.html

More information about the Moon-net mailing list