Hi Serge , it is a 75cm dish. U are suposed to use V pol. 73 Dom ----- Original Message ----- From: <mailto:ve1kg@eastlink.ca>serge To: <mailto:moon-net@mailman.pe1itr.com>moon-net@mailman.pe1itr.com ; <mailto:moon@moonbounce.info>moon@moonbounce.info Sent: Saturday, May 31, 2014 11:11 PM Subject: [Moon] DISH FOR 10ghz Today it was flee market day on my road & I picked up a bran new satellite dish with feed horn & preamp. This is an offset dish which I would like to use to receive DL0SFH beacon on 10ghz It is an odd shape 1M wide & 75 CM high so my question is. Is it a 1M dish or a 75cm dish??? Also the LNB on the feed horn as only one input type F connector. So would the polarization be horizontal or vertical??? I assume this dish is for North America.So do I change the polarization by changing the voltage on the LNB??? Which polarization is needed to receive DL0SFH since I am in NA?? or it does not matter or do I need circular polarization?? I will be using a funcube dongle after the LNB followed by a software program like HDSDR or SDRSHARP or Spectravue. Now does anyone know the IF frequency from these Satellite LNB?? I believe they are around 950mghz or 975mghz but I am not sure. Thank you for your help Serge VE1KG ---------- _______________________________________________ Moon mailing list Moon(a)moonbounce.info http://lists.moonbounce.info/cgi-bin/mailman/listinfo/moon _______________________________________________ Moon mailing list Moon(a)moonbounce.info http://lists.moonbounce.info/cgi-bin/mailman/listinfo/moon