Hi Les Glad that fixed it. I'm no MAP65 expert but my understanding is that if Xpol is checked MAP65 is looking for two sets of I and Q quadrature signals. The FunCube (in all its versions) can only provide a singe set of I+Q signals so if you ask it to do Xpol, it can't and it generates and error from the AudioPort DLL file that does the signal processing. Like the FunCube itself, if it's used with SDR software like SDRplayer and HDSDR can only generate a single I and a single Q signal. As long as MAP65 is getting I+Q audio at the correct sampling rate (90kHz), it should be happy, whatever that signal is coming from. 73 Bob, KA1GT ________________________________ From: Leslie L &lt;llistwa(a)gmail.com&gt; Sent: Monday, March 28, 2022 11:36 PM To: Bob Atkins &lt;ka1gt(a)hotmail.com&gt;om>; moon-net(a)mailman.pe1itr.com &lt;moon-net(a)mailman.pe1itr.com&gt; Subject: Re: [Moon-Net] IC-9700, PTRX-9700, Map-65 Thank you Bob, You are correct, I had "Xpol" checked as its last use was with my 2M Station. Now Map-65 works with the SDRplay and HDSDR, as well as with the FunCube PP+. 73s Les W2LPL On Mon, Mar 28, 2022 at 6:32 PM Bob Atkins <ka1gt@hotmail.com<mailto:ka1gt@hotmail.com>> wrote: Hi Les Do you have "xpol" unchecked in the Setup->Station window? I'm not that familiar with MAP65 (I just use it and it usually works), but I know it can get confused with adaptive polarization. The Funcube is single channel and therefore cannot to any adaptive polarization stuff. It gets upset if you check the xpol box. Port Audio is a DLL I think that's only used with MAP65. I'm guessing it's something to do with adaptive polarization, but that's just a guess. I don't think it's used for audio processing in WSJTX. Let me know if this works. 73 Bob, KA1GT ________________________________ From: Leslie L <llistwa@gmail.com<mailto:llistwa@gmail.com>> Sent: Monday, March 28, 2022 5:14 PM To: Bob Atkins <ka1gt@hotmail.com<mailto:ka1gt@hotmail.com>> Subject: Re: [Moon-Net] IC-9700, PTRX-9700, Map-65 Hi Bob, I can only get Map-65 3.0 to work with my FDP+ when using Linrad ( which I dont want to use). For what ever reason it gives me a port audio failure ( when using the direct mode with the MME format) and using FCHID 2.0. So frustrating. Les On Fri, Mar 25, 2022 at 12:01 AM Bob Atkins <ka1gt@hotmail.com<mailto:ka1gt@hotmail.com>> wrote: Hi Les Map65 should work with the FunCube PP dongle without any additional software. Map65 have native support for (the output from) the FCDP+. MAP65 may(?) have frequency control for the original FCD, but I think it may just bring up the external control package (which doesn't work with the FDDPP anyway). Frequency control is done by external FCDP+ control software (http://www.funcubedongle.com/MyImages/FCHid2.002.zip). That what I have hooked up. Only works for JT65 and 60s mode of Q65 of course. Almost anything can be done via Linrad if you can ever figure out how to configure Linrad...every time I try to use it, it takes me hours to figure out how to use it again or I give up. I've heard that SDR Console can be used. I've used the program, which is very good, but I've never tried to get MAP65 to work with it. Good Luck Bob, KA1GT ________________________________ From: Moon-net <moon-net-bounces@mailman.pe1itr.com<mailto:moon-net-bounces@mailman.pe1itr.com>> on behalf of Leslie L via Moon-net <moon-net@mailman.pe1itr.com<mailto:moon-net@mailman.pe1itr.com>> Sent: Thursday, March 24, 2022 9:59 PM To: moon-net@mailman.pe1itr.com<mailto:moon-net@mailman.pe1itr.com> <moon-net@mailman.pe1itr.com<mailto:moon-net@mailman.pe1itr.com>> Subject: [Moon-Net] IC-9700, PTRX-9700, Map-65 Hi all, I added a PTRX-9700 Panadapter to My IC-9700 for use on 1296Mhz ( Single Pol). So far have not been successful talking to Map-65 3.0 when used with a SDRPlay or my Funcubedongle PP via Linrad or HDSDR. Just want to use it on RX. Has anyone else been able to get Map 3.0 to work in such a configuration? And if so, provide some guidance? 73 Les W2LPL