I have been playing with a new Triquint ULNA device (TQP3M9036). It
Shows a lot of promise. It is like a MAR or MSA device in that it is
50ohm in and out. and has a claimed NF about .4db nf ( their numbers).
I have built several pramps to test them and have gotten even better
than they claim and they cover 50-1296 with ease and NF is .4ish or
below. The S11 and S22 are both great and the OIP3 is +35db also
...very nice device. It has great promise as a good terrestrial LNA.
Preamps are foolproof to build and would cost under $50 if all the best
quality parts are used.
Just for information only ...
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.
I’m ready on 6cm with the same dish I’m using on 3cm.
Despite the strong local 5 GHz WiFi noise, had a nice 579/569 first QSO with this setup today with HB9Q, thank you Dan !
Setup is a 3.7m dish and 60W at CP feeder.
I can be QRV on 6cm or 3cm most of the days, skeds and tests are very welcome, as usual.
qrv 70cm, 33cm, 23cm, 13cm, 9cm, 6cm and 3cm.
I have a few 2M EME station items for sale.
4) Innovantennas 10 element LFA yagis, complete with 4 port power divider,
phasing cables and chokes. All items purchased from Justin at Innovantennas
approx 3 yrs ago.
Complete package shipped in the CONUS $1000.....
2 port power divider from Innovantennas $50
Q5 Signal (previously DEMI) L144-28HP 28Mhz to 2M transverter (-20dbm to 60
Serial #755, All documentation included
Everything is on the Go for the upcoming Dxpedition to Tahiti.
I will complete the remaining tests within next week, then I'll start
Updates will be available on my website www.iw3hvb.it
Take a look, for any questions or sked requests, drop me an email.
CU off the moon.
At my new QTH, I decided to setup a different concept for 432Mhz EME.
The consequence is that there is no space for my R&S VH501 solid state amplifier.
There I will sell this amplifier, which is good for more the 1kW, including standard powersupply as well as vswr protection, indicator and temperature indicator.
Further details can be found on my website section 432Mhz- picture.
Please make me an offer off the reflector.
Unit is for pickup only.
Br. Jan, PA0PLY.
Richard. Will look for U @ 12:15Z on 432.065 from EM64...Ben/K4QFSent from my T-Mobile 4G LTE device------ Original message------From: G Richard Kreuter via Moon-netDate: Sat, Jul 31, 2021 05:58To: moon-net(a)mailman.pe1itr.com;Cc: Subject:[Moon-Net] 70cm EMEWill be QRV 7/31 on 70cm portable from EM79 at 12:00-16:00Z. Listening on 432.065MHz
Note new EMail “gkreute(a)gmail.xn--com-9o0a
Moon-Net posting and subscription instructions are at http://www.nlsa.com/nets/moon-net-help.html
I have a 12 volt 50A server supply Supermicro SP700-1R. Does anyone
have pinout info for this supply?
No output but I am guessing that there needs to be a jumper to enable