Hello- What are some recommendations for a 28 Mhz transceiver for use with high performance transverters for VHF/UHF? I use the Yaesu FT-2000 and am very pleased, but I am a little out of touch with what all is offered today. A friend of mine is purchasing new transverters and would like to upgrade his 28 Mhz IF transceiver. I thought I would ask the group for thoughts on this. He is considering both newly manufactured transceivers or possibly older ones such as the FT-2000. He wants to have a radio that could be used with digital modes thus having high stability. I know some of the newer transceivers don't have transverter provisions. Thanks, Byron W5FH
OK let me provide a link to the image I attached. to reduce it to a text
message size with a link..
Best, 73, Pat Barthelow AA6EG
*"The most exciting phrase to hear in Science, the one that heraldsnew
discoveries, is not "Eureka, I have found it!" but:*
"That's funny..." ----Isaac Asimov
On Mon, Jan 1, 2018 at 2:12 AM, <moon-owner(a)moonbounce.info> wrote:
> Your mail to 'Moon' with the subject
> Re: [Moon] QRO
> Is being held until the list moderator can review it for approval.
> The reason it is being held:
> Message body is too big: 2627808 bytes with a limit of 40 KB
> Either the message will get posted to the list, or you will receive
> notification of the moderator's decision. If you would like to cancel
> this posting, please visit the following URL:
First HAPPY NEWYEAR to all.
I have a decode problem whit WSJTX and don,t know how to fix this.
I was monitoring the JT65b signals off GB3VHF to test the WSJTX program.
On WSJT10 and on WSJTX i see gd traces on booth waterfalls
I see this on WSJT....
1132 2 -19 0.2 476 5 *GB3VHF JO01EH
I see this on WSJTX...
1132 -19 1.5 1466 #
The problem on WSJTX is that i never see the call and the locator.
So i download some audio samples and test this with WSJTX
Now WSJTX decode all callsign and shorthands ok.
I also put in the call3 file in the WSJT program with the same results.
So WSJTX works fine on the audio samples buth not on the audio of my
Working now whit a laptop and before with a desktop computer and all was
Is it a soundcard problem of my laptop?
Who know the answer?
73 GYS PA1GYS
Fortunately my repair job on the second EME PA module today was successful.
I have the full 500W again!
For those that suffer trouble with the otherwise much appreciated PE1RKI
amps, I have an important advice. In my case on two occasions the thin power
feed line on the PCB two either of the two FET's burned, as they are simply
too thin. If one PCB trace fails and hence the supply to the FET, there will
be misbalance in the Wilkinson combiner resulting in the eventual death of
Replace the two lines with 1mm silver wire or alike and your PA will be more
I am looking forward to 2018 with full power again and will be active
tonight after the New Year's party J
Making use of the opportunity to wish you all a very good 2018!
Best 73, Dick PA2DW